3. Norms for certain coating materials and coating systems
3.1 Aluminium
| DIN | Editon | Short Title |
| 55632-1 | 1995-12 Draft | Coating on aluminium using powder coating |
3.2 Coil coatings
| DIN | Edition | Short Title |
| EN 13523-0 | 2001-12 | Coil coated metals - general introduction and list of test methods |
| EN 13523-1 | 2001-12 | Coating thickness |
| EN 13523-2 | 2001-12 | Specular gloss |
| EN 13523-3 | 2001-12 | Colour difference, instrumental comparison |
| EN 13523-4 | 2001-12 | Pencil hardness |
| EN 13523-5 | 2001-12 | Resistance to rapid deformation (impact test) |
| EN 13523-6 | 2002-10 | Adhesion after indentation (cupping test) |
| EN 13523-7 | 2001-12 | Resistance to cracking on bending (T-bend test) |
| EN 13523-8 | 2002-10 | Resistance to salt spray (fog) |
| EN 13523-9 | 2001-12 | Resistance to water immersion |
| EN 13523-10 | 2001-12 | Resistance to fluorescent UV light and water condensation |
| EN 13523-11 | 2003-03 Draft | Resistance to solvents (rubbing test) |
| EN 13523-12 | 2003-03 Draft | Resistance to scatching |
| EN 13523-13 | 2001-12 | Resistance to accelerated ageing by the use of heat |
| EN 13523-14 | 2001-12 | Chalking (Helmen method) |
| EN 13523-15 | 2002-10 | Metamerism |
| EN 13523-16 | 2003-03 Draft | Resistance to abrasion |
| EN 13523-17 | 2003-03 Draft | Adhesion of strippable films |
| EN 13523-18 | 2002-10 | Resistance to staining |
| EN 13523-20 | 2003-03 Draft | Foam adhesion |
| EN 13523-21 | 2001-11 Draft | Evaluation of outdoor exposed panels |
| EN 13523-22 | 2003-09 | Colour difference, visual comparison |
| EN 13523-23 | 2002-10 | Colour stability in humid atmospheres containing sulfur dioxide |
| EN 13523-24 | 2003-03 Draft | Resistance to blocking and pressure marking |
3.3 Galvanized steel
| DIN | Edition | Short Title |
| EN 13438 | 1999-03 | Powder organic coatings for galvanized steel products for construction purposes |
3.4 Exterior wood
| DIN | Edtion | Short Title |
| EN 927-1 | 1996-10 | Classification and selection |
| V ENV 927-2 | 2000-11 Pre-Stand. | Performance specification |
| EN 927-3 | 2003-06 | Natural weathering test |
| EN 927-4 | 2001-01 | Assessment of the liquid water-vapor permeability |
| EN 927-5 | 2001-01 | Assessmant of the liquid water permeability |
3.5 für den Korrosionsschutz von Stahlbauten
| DIN | Edition | Short Title |
| EN 10238 | 1996-11 | Automatically blast-cleaned and automatically prefabrication primed structured stell products |
| V ENV 12837 | 2000-09 | Qualification of inspectors for corrosion protection of stell structures by protective paint systems |
| EN ISO 12944-1 | 1998-07 | Corrosion protection of stell structures by protective paint systems- general introduction |
| EN ISO 12944-2 | 1998-07 | Classification of environments |
| EN ISO 12944-3 | 1998-07 | Design considerations |
| EN ISO 12944-4 | 1998-07 | Types of surface and surface preparation |
| EN ISO 12944-5 | 1998-07 | Protective paint systems |
| EN ISO 12944 6 | 1998-07 | Laboratory performance test |
| EN ISO 12944-7 | 1998-07 | Execution and supervion of paint work |
| EN ISO 12944-8 | 1998-07 | Development and specifications of new work and maintenance |
| EN ISO 19840 | 2002-04 Draft | Measurement and acceptance criteria of the dry film thickness on rough surfaces |
| 55928-8 | 1994-07 | Protection of supporting thin-walled building components from corrosion |
| 55928-9 | 1991-05 | Coating materials - Composition of binders and pigments |
ISO-Norms with German text (not carried over as DIN Norms)
| ISO 8501-1 | 1988 | Rust grades and preparation of grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8501-1 Erg. | 1994 | Representative photographic examles of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| ISO 8501-2 | 1994 | Preparation grades of previously coated steel substrates after localized removal of previous coatings |
3.6 Nuclear facilities
| DIN | Edition | Short Title |
| 55991-2 | 1983-08 | Coatings-requirements and testing |
| 55991-2 | 1992-02 | Coating materials-identity testing of coating materials |
| 55991-3 | 1992-07 Draft | Coating work, planning and procedure |
3.7 Aerospace industry
| DIN | Edition | short Title |
| EN 3840 | 1994-12 Draft | Technical specifications for coating materials |
| 29597 | 1995-04 | Application of liquid coating materials |
| 65046-1 | 1998-12 | Methods of test for surface protective coatings; paints, varnishes - survey and identification |
| 65046-2 | 1998-12 | Specimens, preparations of specimens, drying |
| 65046-3 | 1998-12 | Tests in as-delivered conditions |
| 65046-4 | 1998-12 | Testing of coatings |
| 65046-5 | 1998-12 | Coating resistance tests |
| 65081 | 1995-04 | Technical specifications for coating materials |
3.8 external masonry and concrete
| DIN | Edition | Short Title |
| EN 1062-1 | 1996-12 | Coating materials and coating systems of exterior masonry amd concrete - classification |
| EN 1062-1 | 2002-10 Draft | Coating materials and coating systems of exterior masonry amd concrete - classification |
| EN 1062-3 | 1999-02 | Determination and classification of liquid-water transmission rate (permeability) |
| EN 1062-6 | 2002-10 | Determination of carbon dioxide permeability |
| EN 1062-7 | 2002-10 Draft | Dertermination of crack bridging properties |
| EN 1062-11 | 2002-10 | Methods of conditioning before testing |
| EN ISO 7783-2 | 1999-04 | Determination and classification of water-vapour |
3.9 Ship building
| DIN | Edition | Short Title |
| 80200 | 1979-02 | Steel components for shipbuilding; symbols for surface preparations, shop primers and priming coats |
3.10 Interior disperion colours
| DIN | Edition | Short Title |
| EN 13300 | 2002-11 | Water-borne coating materials and coating systems for interior walls and ceiling - classification |
| EN ISO 11998 | 2001-12 | Determination of wet-srub resistance and cleanability of coatings |
| 53778-3 | 1983-08 | Emulsion paints; determination of contrast ratio and lightness of coatings |
| 53778-4 | 1983-08 | Testing for re-coatability after specified drying time |
| 55649 | 2001-03 | Determination of volatile organic compound content in waterthinnable emulsion paints (In-can VOC) |
3.11 Kunstharzputze
| DIN | Edition | Short Title |
| 18556 | 1985-01 | Testing of coating material for synthetic resin plasters and of synthetic resin plasters |
| 18558 | 1985-01 | Synthetic resin plasters; terminology, requirements, application |
3.12 Pulverlacke
| DIN | Edition | Short Title |
| EN 13438 | 1999-03 Draft | powder organic coatings for galvanized steel products for construction purposes |
| EN ISO 8130-9 | 1999-07 | Sampling |
| EN ISO 8130-14 | 2003-04 Draft | Terminology |
| ISO 8130-1 | 2003-09 Draft | Determination of particle size distribution by sieving |
| ISO 8130-2 | 2003-09 Draft | Determination of density by gas comparison pyknometer (referee method) |
| ISO 8130-3 | 2003-09 Draft | Determination of density by liquid displacement pyknometer |
| ISO 8130-4 | 2003-09 Draft | Calculation of lower explosion limit |
| ISO 8130-5 | 2003-09 Draft | Determination of flow properties of a powder/air mixture |
| ISO 8130-6 | 2003-09 Draft | Determination of gel time of thermosetting coating powders at given temperature |
| ISO 8130-7 | 2003-09 Draft | Determination of loss mass on stoving |
| ISO 8130-8 | 2003-09 Draft | Assessment of the storage stability of thermosetting powders |
| ISO 8130-10 | 2003-09 Draft | Determination of deposition effecienty |
| ISO 8130-11 | 2003-09 Draft | Inclined-plane flow test |
| ISO 8130-12 | 2003-09 Draft | Determination of compatibility |
| ISO 8130-13 | 2003-09 Draft | Particle size analysis by laser diffraction |
| 55632-1 | 1995-12 Draft | Powder coatings on aluminium and aluminium alloys for building purposes |
| 55690 | 1988-01 | Picture appellations for powder coatings |
| 55990-2 | 1979-12 | Determination of particle size distribution |
| 55990-3 | 1979-12 | Determination of density |
| 55990-4 | 1979-12 | Determination of stoving conditions |
| 55990-5 | 1980-01 | Determination of loss on stoving |
| 55990-6 | 1979-12 | Calculation of lower ignition limit |
| 55990-7 | 1980-06 | Assessment of resistance to caking |
| 55990-8 | 1980-06 | Assessment of the chemical storage stability |
3.13 Road marking materials
| DIN | Edition | Short title |
| EN 1436 | 2003-07 | Road marking performances for road users |
| EN 1824 | 1998-03 | Road trials |
| EN 1871 | 2000-03 | Physical properties |
| EN 12802 | 2000-03 | Laboratory methods for identification |
| EN 13197 | 2001-07 | Wear simulators |
| EN 13212 | 2001-07 | Requirements for the factory production conatrol |
| V ENV 13459-1 | 1999-11 Pre-Standard |
Quality control -Partl 1: Sampling from storage and testing |
| V ENV 13459-2 | 1999-11 Pre-Standard | Quality control -Part 2: Guidelines for preparing quality plants for materials application |
| V ENV 13459-3 | 1999-11 Pre-Standard | Quality control -Part 3: Performance in use |
3.14 Coatings for radiators
| DIN | Edition | Short Title |
| 55900-1 | 2002-05 | Terms, requirements and tests for primers and industrially applied priming coats |
| 55900-2 | 2002-05 | Terms, requirements and tests for finishing paints and industrially applied finishing coats |
